[SUPER QUALITY RAW MATERIAL] Barn door hardware kit are made of 1/4” thick carbon steel (Maximum load 265lbs). Barn door wheel are made of POM (Stronger than plastic or nylon). Barn door spacer is also made of carbon steel (More stable than other plastic spacer). The bolts and leg screws are 8.8 grade (Keep the barn door hardware system last for long). The surface is spray black powder coat (Anti-rust, Looks smooth).
[EASY TO INSTALL] Barn door track pre-drilled hole space is 16″, Step by Step Instruction included. Our Instruction is listing every step for installation from A to Z. You can finish the installation of barn door hardware kit in half an hour if you get 2 workers. In case you get any problem or missing parts during installation, please free feel to contact us via amazon.
[IF MY BARN DOOR FIT THIS SIZE] 6FT Barn door hardware kit fit for door panel width up to 36”, Fit for door thickness from 1-3/8″ to 1-3/4″(If you your barn door panel is too thin, then you can using the 5mm black spacer pad inside package, if your barn door is too thick, then you need to buy longer bolt extra). If you have a door way trim, then you need to buy an extra trim board to install the barn door track or just remove your trim.
[WHY US] Get super quality barn door hardware kit from us, All the barn door track and barn door roller have been inspected in factory before delivery, Also they have been Passed 100,000 times opening and closing test to ensure the barn door hardware kit you get will works fine. Get a barn door hardware kit with a manufacturer price, why not?
[WHAT YOU WILL GET] (5)Barn door track, (5) Wall spacer with leg screws, (2) Door stopper, (2) Barn door roller with bolts and nuts, (2) End Cap, (1) Floor Guide, (1) Step by Step Manual. “ONLY HARDWARE KIT INCLUDING, BARN DOORS WERE NOT INCLUDED.”
Brand
SKYSEN
Color
Black
Material
Carbon Steel
Style
Classic
Item Weight
14 pounds
Assembly Required
Yes
UPC
795853111798
Manufacturer
skysen
Product Dimensions
16.93 x 4.72 x 3.15 inches
Size
6FT（5pcs track）
Item Package Quantity
1
Batteries Included
No
Batteries Required
No
8 reviews for SKYSEN 6FT Sliding barn Door Hardware kit, Barn Door Track, 1/4” Thick Material- Combination Track- Smooth and Quiet- Easy to Install- Black (J…
Rated 5 out of 5
Daryl A. Kling –
Durable and easy to install with a gentle glide.
Rated 5 out of 5
L.Mary W –
Great door at a good price. Easy to install
Rated 5 out of 5
Joshua W Eskridge Sr –
The price is great! Durable and stylish AND instructions are clear, easy to install. (NOTE: if mounting on drywall, make sure backing plate is installed at each mounting point prior to hanging drywall.) The barn door hangar comes with two (2) separate sets of hardware. One for drywall and the other for brick. I have mine in drywall and the movement of the door is secure and can’t wallow out the holes in the backing plate.
Rated 3 out of 5
beckyp223 –
Because this is not one length of metal it did not install perfectly straight. There are short pieces of steel that fit together and then are tighten with screws. You can bear down on the tightening screws, but they don’t all tighten sufficiently to keep the entire length completely even. It was frustrating. Finally got it up and it works okay, doesnt stick or cinch up, but an ordeal for sure. I know the metal is in short lengths for shipping purposes, but the next time I buy one for another door for our hall next it will be from a big box store so I can buy a single solid length.
Rated 5 out of 5
Daryl A. Kling –
I installed this kit into a space about 5 1/2 feet wide To do this, I held the bar up against the wall, taking care to line the mounting holes up with the clearly marked studs (using painters tape). Once lined up w the studs, I marked and cut the ends off on each side. From here, I drilled two new mounting holes through the bar for the end studs which should be present on any wall. This is a very soft steel so drilling was very easy. I had to trim the flange off one side of the mounting stand-offs to allow it to fit flush against the corner wall. This allowed the included wood-threaded bolts to go through the [near] center of the wall stud.
Installation tips: This kit comes with very smooth rolling hardware so you have to be sure to get your top bar as absolutely level as possible. This also ensuring that the bar is straight through each joint. There are five sections so all four joints have to be very straight. If you have a slight “up” angle at either end, as I did, the door won’t stay pushed all the way to that side. To fix mine, I was able to lightly knock the end down at the last (leftmost) mounting standoff.
Spacers are included which are meant to go between the rail stand-offs and the wall. I initially did not use them and the roller bolts rubbed on the wall ever so slightly. I installed one set of spacers which resulted in perfect spacing.
The floor guides can be the trickiest part if you’re drilling through vynil or laminate flooring to get down to some concrete. I drilled through the vinyl using a standard multi-purpose bit, then switched to a masonry bit to get down into the slab for the insert. I only installed a single floor guide on the outside for now and am using peel-n-stick felt dots on the back of the door to ride on the baseboard. So far this is good but I have some clear protective vinyl adhesive on order which we will install on the baseboard to make it slide easier/smoother as well as provide protective layer on top of the baseboard paint.
All in all, this is a very solid kit that installs well.
Rated 4 out of 5
Liaha –
Works ok. Looks nice not easy to assemble.
Rated 5 out of 5
X-FACTOR Automotive –
I didn’t know what to expect for such a reasonable price, but was pleasantly surprised. It came with all hardware and all the pieces are actually metal, not cheap plastic. I also had concerns about the 5 piece rail, but my concerns were unfounded. It assembled easily and with the countersunk screws and support plates, it’s very rigid. No complaints here! Everything in nicely painted and looks great. The hanger and roller assembly it nice and heavy and rolls nice. The stops for fully open or closed even have rubber bumpers for quiet operation.
Rated 5 out of 5
Cheryl –
This is my second type of barn door hardware. I must say I like the ease of installation and the way it is put together, I usually have to install it by myself, so I like the way, it had 2 screws and a plate to keep the pieces together, at each point. My other one did not have that, so when you tried to pick it up, it would tip, and tend to fall apart, before you could get it attached. Might also been a learning process, because I had never installed a barn door before. Would definitely buy this unit again, if I had another project. Works great! Nice and smooth operation.
Daryl A. Kling –
Durable and easy to install with a gentle glide.
L.Mary W –
Great door at a good price. Easy to install
Joshua W Eskridge Sr –
The price is great! Durable and stylish AND instructions are clear, easy to install. (NOTE: if mounting on drywall, make sure backing plate is installed at each mounting point prior to hanging drywall.) The barn door hangar comes with two (2) separate sets of hardware. One for drywall and the other for brick. I have mine in drywall and the movement of the door is secure and can’t wallow out the holes in the backing plate.
beckyp223 –
Because this is not one length of metal it did not install perfectly straight. There are short pieces of steel that fit together and then are tighten with screws. You can bear down on the tightening screws, but they don’t all tighten sufficiently to keep the entire length completely even. It was frustrating. Finally got it up and it works okay, doesnt stick or cinch up, but an ordeal for sure. I know the metal is in short lengths for shipping purposes, but the next time I buy one for another door for our hall next it will be from a big box store so I can buy a single solid length.
Daryl A. Kling –
I installed this kit into a space about 5 1/2 feet wide To do this, I held the bar up against the wall, taking care to line the mounting holes up with the clearly marked studs (using painters tape). Once lined up w the studs, I marked and cut the ends off on each side. From here, I drilled two new mounting holes through the bar for the end studs which should be present on any wall. This is a very soft steel so drilling was very easy. I had to trim the flange off one side of the mounting stand-offs to allow it to fit flush against the corner wall. This allowed the included wood-threaded bolts to go through the [near] center of the wall stud.
Installation tips: This kit comes with very smooth rolling hardware so you have to be sure to get your top bar as absolutely level as possible. This also ensuring that the bar is straight through each joint. There are five sections so all four joints have to be very straight. If you have a slight “up” angle at either end, as I did, the door won’t stay pushed all the way to that side. To fix mine, I was able to lightly knock the end down at the last (leftmost) mounting standoff.
Spacers are included which are meant to go between the rail stand-offs and the wall. I initially did not use them and the roller bolts rubbed on the wall ever so slightly. I installed one set of spacers which resulted in perfect spacing.
The floor guides can be the trickiest part if you’re drilling through vynil or laminate flooring to get down to some concrete. I drilled through the vinyl using a standard multi-purpose bit, then switched to a masonry bit to get down into the slab for the insert. I only installed a single floor guide on the outside for now and am using peel-n-stick felt dots on the back of the door to ride on the baseboard. So far this is good but I have some clear protective vinyl adhesive on order which we will install on the baseboard to make it slide easier/smoother as well as provide protective layer on top of the baseboard paint.
All in all, this is a very solid kit that installs well.
Liaha –
Works ok. Looks nice not easy to assemble.
X-FACTOR Automotive –
I didn’t know what to expect for such a reasonable price, but was pleasantly surprised. It came with all hardware and all the pieces are actually metal, not cheap plastic. I also had concerns about the 5 piece rail, but my concerns were unfounded. It assembled easily and with the countersunk screws and support plates, it’s very rigid. No complaints here! Everything in nicely painted and looks great. The hanger and roller assembly it nice and heavy and rolls nice. The stops for fully open or closed even have rubber bumpers for quiet operation.
Cheryl –
This is my second type of barn door hardware. I must say I like the ease of installation and the way it is put together, I usually have to install it by myself, so I like the way, it had 2 screws and a plate to keep the pieces together, at each point. My other one did not have that, so when you tried to pick it up, it would tip, and tend to fall apart, before you could get it attached. Might also been a learning process, because I had never installed a barn door before. Would definitely buy this unit again, if I had another project. Works great! Nice and smooth operation.